Pride wallpaper paste

Pride wallpaper paste is suitable for non-woven, paper, and vinyl wallpapers. The paste is starch-based and is provided in an environmentally friendly powder form; you just need to add water.

Packs are available in two different sizes; 200 g and 600 g (3x200 g).

Product Code: Pride
Featured posts
Morris tapetit valmiina tapetointiin
How do you wallpaper? Here you get help and advice on wallpapering.

Description

Preparations: The base must be clean, dry, even, solid, and have normal absorption. Porous surfaces must be treated before wallpapering.  

Instructions: Check the table for the required amount of water and mix the powder with cold water. Stir vigorously for 30 seconds and continue stirring occasionally to prevent lumping. After about 10 minutes, the wallpaper paste is ready to use. Be careful not to get paste on the patterned side of the wallpaper, especially with dark or velvet-finish wallpapers.

For non-woven wallpaper: Mix one 200 g packet with 5 liters of water. The paste is enough for 3-5 rolls. Apply the wallpaper paste directly to the wall.

For thin paper wallpaper: Mix one 200 g packet with 7 liters of water. The paste is enough for 7-10 rolls. Apply the paste directly to the wallpaper and immediately attach it to the wall.

For thick paper wallpaper: Mix one 200 g packet with 5 liters of water. The paste is enough for 3-5 rolls. Apply the wallpaper paste directly to the wallpaper. Allow the thick wallpaper to absorb the paste until it softens before attaching it to the wall.

For vinyl and washable paper wallpaper: Mix one 200 g packet with 5.5 liters of water. The paste is enough for 5-7 rolls.

For embossed vinyl and heavy embossed wallpapers, as well as polystyrene tiles: Mix one 200 g packet with 4 liters of water. The paste is enough for about 4 rolls.

  Psst.  Alvar -  The AI assistant made these suggestions for you!